ip stresser

Dr. Anitha D B                                                                            
ASSOCIATE PROFESSOR


E-mail: Dr.Anithadb_cs@atme.edu.in

Qualification

  1. PhD in Electronics on the topic “Printed Circuit Board Defect Detection using Image Processing Techniques” from University of Mysore in 2021.
  2. Post-Graduation in “VLSI and Embedded system Design” at SJCE, Mysore affiliated to VTU in 2007.
  3. Bachelor of Engineering in Electronics and Communication Engineering, at PESCE, Mandya from University of Mysore in 2000.

Total Experience in Years

  1. Associate Professor in the department CSE(Data Science), ATME College of Engineering from April 24th to till date.
  2. Assistant Dean, Research and Development and Associate Professor, VVIET Mysore from October 2022 to April 21st 2023
  3. Associate Professor in the department of E&C Engineering, VVIET, Mysuru from November 2012-Till date.
  4. Assistant Professor in the department of E&C Engineering, VVIET, Mysuru from  August 2010 – September 2012
  5.  Senior Lecturer in the department of E&C Engineering, VVIET, Mysuru from September 2008 – 2010.
  6. Lecturer in the department of E&C Engineering, VVIET, Mysuru from September 2003 –August 2008.
  7. Lecturer in the department of E&C Engineering, CIT, Ponnampet from September 2001-August 2003
  8. Trainee in Advanced DSP & Embedded systems at Adamya Group of Companies, Bangalore from December 2000- August 2001.

Research Publications

  1. Anitha D B, Mahesh Rao, ”Solder joint defect detection in PCBA chip components based on the Histogram Analysis”, IEEE TEMSMET Conference, 2023(presented)
  2. Vanajakshi , Veena .G, Yadhunandan .A , Sowjanya .U .P, Dr. Anitha .D .B, ”Detection of Counterfeit Indian Currency Note using Image Processing”, IJESC, Volume 11, Issue 7, July 2021
  3. Anitha D B, Jyothi T M, Pooja R, Sahana N, ”Smart Glass for Visually Challenged Peoples to Read the Books using Raspberry Pi”, International Journal of Advanced Research in Science, Communication and Technology (IJARSCT) Volume 8, Issue 1, August 2021
  4. Anitha D B, Dr. Mahesh Rao, “Bare and Assembled PCB Inspection through Graphical User Interface”, International Advanced Research Journal in Science, Engineering and Technology Vol. 8, Issue 2, February 2021.
  5. Anitha D B, Mahesh Rao, “Bare Board Multilayer Printed Circuit Board Defect Identification followed by Localization”, International Journal of Computer Information Systems and Industrial Management Applications, ISSN 2150-7988 Volume 12, 2020
  6. Anitha D B, Mahesh Rao, ” SMT Component Inspection in PCBA’s using Image Processing Techniques”, International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-12, October 2019.
  7. Anitha D B, Mahesh Rao, “Bare PCB inspection for Track cut, Track Short and Pad Damage using simple Image Processing Operations”, International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-8 Issue-6, August 2019
  8. Deepa P, Anitha D B, Mahesh Rao,” Through Hole Component Inspection Monitoring System”, International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-2, July 2019.
  9. Swathi M N, Vaibhavi V Patil, Pooja K N,Harinakshi B S, Anitha D B, “Error Detection In Printed Circuit Board Assembly”, International Journal of Engineering Research & Technology, NCESC – 2018 Conference Proceedings.
  10. Anitha D B and Mahesh Rao, “A Survey on Defect Detection in Bare PCB and Assembled PCB using Image Processing Techniques”, IEEE International conference on WiSPNET2017 , March 2017.
  11. Nayana H G, Deepa P, Anitha D B and Mahesh Rao, “A Review on Defect Detection SMT and Through Hole Components in Assembled PCB”, International Journal of Advanced Research in Computer Science and Technology(IJARCST), Volume 5, Issue 2, April 2017.
  12. Manasa and Anitha D B, “Fault Detection of Assembled PCB through Image processing using LabVIEW”, International Journal of Engineering Research & Technology(IJERT),Volume 5,Issue 05, May 2016.
  13. Sindhu and Anitha D B, “An Enhanced Image Cryptographic Method Based on AES Rijndel Algorithm”, IJSRD, Volume 4, Issue 3, March 2016.
  14. Amreen and Anitha D B, “Digital Image Processing using DWT-SPIHT and BCH Codec Approach”, IJEECS, Volume 4, Issue 8, 2016.

International/ National Conferences Attended

  1. Four days 15th International Conference on Distributed Computing and Internet Technology organized by KIIT Deemed to be University, Bhubaneswar, Odisha, India during 10th-13th January 2019.
  2. Two Days 6th International Conference on Signal and Image Processing ICSIP-2017 organized by Maharaja Institute of Technology, Mysuru during 18th and 19th August 2017
  3. Three Day IEEE International Conference on Wireless communication, Signal Processing and Networking WiSPNet-2017 held at SSN College of  Engineering, Chennai, India during 22nd-24th March 2017
  4. Two Day International Conference on Signal and Image Processing (ICSIP –2009), VVIET, Mysuru, held during 12th to 14th August 2009.
  5. Third National Conference on Engineering Innovations and solutions (NCEIS-2019 Organized by Department of Information Science and Engineering, GSSSIETW, Mysore held on 23rd April 2019

Additional Responsibilities

  1. Assistant Dean R and D form September 2022 to till date
  2. Member of Skill Development Cell from 2018 to till date
  3. PCB design and Manufacturing certification Coordinator from 2017 to till date.
  4. PG Coordinator from 2017 to 2019.
  5. Department Subject allotment Coordinator from 2013 to till date.
  6. NBA Criterion 4 Coordinator.
  7. Project coordinator in 2013, 2018 and 2020-21 to till date.
  8. Department Time Table Coordinator from 2005 -2008 and 2017.

Membership Certificates

  1. Institute of Electronics and Telecommunication Engineering (IETE).
  2. Indian Printed Circuit Association (IPCA), Bangalore.
  3. IEEE Senior Member

Research Interest

  1. Computer Vision
  2. Signal & Image Processing
  3. Digital Signal Processing
  4. VLSI Design
  5. Embedded System

Achievements/ Awards/ Appreciation Certificates

  1. Secretary VVIET Appreciate the initiatives taken for the development of students through the Industry collaborating on 15th August 2022(Cash award of Rs. 12000).
  2. Certified Trainer with Trainer ID- TR78857 for the Qualification Pack of Design Engineer ELE/Q8703 conforming to National Skill Qualification Frame work Level -4, November 30th 2018.
  3. ESSCI Certified Master Trainer for the Qualification Pack Q8703-PCB design Engineer, Trainer Unique ID:ELE/Q8703/T-0007 provided by Electronic Sector Skill Council of India(ESSCI), New Delhi and approved by National Skill Development Corporation(NSDC),November 18, 2017 
  4. Member of National Occupational Standards (NOS) Committee for PCB Design and Manufacturing, Electronics Sector Skill Council of India (ESSCI), New Delhi from 2018 to till date.
  5. Secretary VVIET Appreciate the effort taken in collaborating with the Industry Association, undergoing training, transferring knowledge and all other steps taken to make IPCA training program for the benefits of students initiative a successful one , August 2nd 2018(cash award of Rs. 9000).
  6. Electronics Sector Skill Council of India (ESSCI) acknowledges and appreciates the Valuable participation in industry meet for PCB Design and Manufacturing on August 31st 2018.
  7. Electronics Sector Skill Council of India (ESSCI) acknowledges and appreciates the Valuable participation in NOS Committee member of PCB Design and Manufacturing on December 12th 2018.
  8. Certificate of Appreciation for showcase the Project Sensor Based Pesticide Detection System in 8th Project Innovation Contest Organized by KIIT Deemed to be University, Bhubaneswar, Odisha, India during 10th-13th January 2019.
  9. Elite, NPTEL Online Certification for “Matlab Programming for Numerical Computation”, IIT Madras Jan- Mar 2017.
  10.  Developed Python code for Digital Signal Processing Lab programs
  11. Microsoft Certification course for Introduction to Programming Using Python in 2022.

FDP Programmes

Conducted

  1. Conducted Five days FDP on “PCB Design” at VVIET in Association with Scienna Ecad Technologies, Bengaluru and Electronics Sector Skill Council of India, New Delhi from 29th June to 3rd July 2020.
  2. Conducted Five days FDP on “PCB Design and Manufacturing Process” at VVIET in Association with IPCA and ESSCI during 19th to 23rd November 2019.
  3. Conducted five days online workshop on Basics of Python for third year students
  4. Conducted one day workshop on Signal and Image Processing using Python for second year students.

Attended

  1. Successfully completed free online course on Introduction to Machine Learning with AWS provided by Great Learning Academy in March 2022.
  2. Successfully completed free online course on Data Visualization using Python provided by Great Learning Academy in March 2022.
  3. Successfully completed free online course on Cloud Foundation provided by Great Learning Academy in March 2022.
  4. Webinar on Advanced Sensing and measurement Technology using MRS,AI2 CMM Technologies organized by MAXIM SMT and CYBEROPTICS
  5. Webinar on Basics of Image Acquisition organized by Qualitas Technologies Bengaluru on Feb 24th 2022
  6. Participated in the workshop “Embedded Systems – An Application Driven Approach” organized by the All India Council for Technical Education (AICTE), ATAL Academy, STMicroelectronics and Arm Education, from August 25th – 27th 2021.
  7. Participated & completed successfully AICTE Training and Learning (ATAL) Academy Online Five Days Elementary FDP on “Machine Learning Applications in Micro-Nano VLSI Technologies” from 2021-06-21 to 2021-06-25 at BVRIT HYDERABAD College of Engineering for Women.
  8. Participated & completed successfully AICTE Training and Learning (ATAL) Academy Online Five days Elementary FDP on “Formal Verification of Digital Designs” from 2021-06-07 to 2021-06-11 at PES UNIVERSITY.
  9. Participated & completed successfully AICTE Training and Learning (ATAL) Academy Online Five Days Elementary FDP on “RECENT TRENDS IN PRECISION AGRICULTURE” from 2021-05-31 to 2021-06-04 at Sant Longowal Institute of Engg. and Technology, Longowal.
  10. Participated & completed successfully AICTE Training and Learning (ATAL) Academy Online Five days FDP on “Artificial Intelligence and Machine Learning” from 2021-1-18 to 2021-1-22 at MVJ COLLEGE OF ENGINEERING.
  11. Participated & completed successfully AICTE Training and Learning (ATAL) Academy Online FDP on “Data Sciences” from 2021-2-1 to 2021-2-5 at KLE DR. M. S. Sheshgiri College of Engineering & Technology Belagavi.
  12. Successfully completed free online course on Python for Machine Learning provided by Great Learning Academy.
  13. Successfully completed free online course on Statistics for Machine Learning provided by Great Learning Academy
  14. Successfully completed free online Class on Python 3 Tutorial course provided by SOLO Learn
  15. Successfully completed free online Tutorial on SQL Fundamental Course provided by SOLO Learn
  16.  Three days TEQIP-III sponsored online FDP on “Recent Advances in Automation and Networking”, organized by Department of Electronics and Communication Engineering, Basaveshwar Engineering College, Bagalkot, Karnataka, India from 18th to 20th June 2020.
  17. Three days Online FDP on “ R Programming Language” organized by Department of Computer Science Engineering, SKSVMA college of Engineering and Technology, Gadag  in association with IIT Bombay from 28th to 30th May 2020.
  18. One day Workshop on Effective Project Proposal Writing skills for funding Agencies       organized by VVIET during 26th October 2019.
  19. One day workshop on eSim, First course in the IOT Series for Teachers organized by the Teaching Learning Center ICT at IIT Bombay funded by the Pandith Madan Mohan Malaviya National Mission on Teachers and Teaching (PMMMNMTT), MHRD, Govt. of India held on 21st September 2019 at Maharaja Institute of Technology, Mysuru.
  20. Six Days International Workshop on “Machine Learning: Insights and Applications” held from 25th to 30th July 2018 organized by Department of Electronics and Communication Engineering, VVCE, Mysuru
  21. Three Days VGST Sponsored Faculty Development raining Program on “Real Time Multi Core Design Engineering in the field of Communication ” organized by VVIET,ECE Department from 21st& 24th of March 2018
  22. Seven Days Faculty Training Program on “PCB Manufacturing Process” organized by VVIET in Association with IPCA and ESSCI from 11th & 23rd of Jan 2018.
  23. Three Days Faculty Training Program on “PCB Design using EDWinXP Software”, organized by VVIET in Association with IPCA and ESSCI from 9th to 11th of December 2017.
  24. Three Day National workshop on “Master Trainer Program” organized by ESSCI at BIT, Tamil Nadu, held during 16th & 18th of November 2017.
  25. Two Day workshop on “Multilayer PCB manufacturing Process”, Indian Printed Circuit Association (IPCA), Bangalore, held at ATOTECH Bangalore, during 5th & 6th of October 2017.
  26. One Day National Seminar on “Recent Trends in PCB Technology”, NIEIT, Mysuru, held on 3rd April 2017
  27. Two Day workshop on “Statistics and Probability”, MIT, Mysuru, held during 15th & 16th of October 2016.
  28. Two Day workshop on “PLC and SCADA”, VTU, Regional Center, Mysuru held on 17th & 18th Jan 2014.
  29. One Day Faculty Development Program on “InFacE-Industry update for Faculty Enrichment”, VVIET, Mysuru in association with IEEE Consumer Electronics Society, Bangalore Chapter, held on 2nd February 2013.
  30. One Day Faculty Development Program on “Emerging trends in Wireless Networks and Avenues for Research”, VVIET, Mysuru, held on 1st July 2013.
  31. Two Day Faculty Development Program on “Virtual Instrumentation – Labview”, VVIET, Mysuru, in association with Trident Tech Labs, Bangalore, held during 6th & 7th January 2012.
  32. One week VTU-VGST Faculty Development Program on “Advances in communication and network systems”, B.G.S.I.T, Bellur, held during 12th & 16th March 2012.
  33. One week VTU-VGST Faculty Development Program on “ Recent Advances in Medical Imaging Techniques”, GSSSIETW, Mysore, held during 26th & 30th March 2012
  34. One Day Faculty Development Program on “MATLAB Application for DSP, Image Processing & Control Systems”, VVIET, Mysuru, held on 31st July 2012.
  35. Two Day workshop on MSP430 Microcontroller VVIET, Mysuru in association with Advanced Electronics Systems (ALS) held during 12th & 13th December 2011.
  36. Two Day Faculty Development Program on “Analog System Design”, VVIET, Mysuru, in association with Texas instruments and cranes software, Bangalore held during 12 th & 13 th July 2011.
  37. Two Days National workshop on “Image processing and computer vision”,Dayananda Sagar college of Engineering, Bangalore, held during 16-10-2008 to 17-10-2008.
  38. One Day National Level workshop on ARM9, ISM, Bangalore, held during 23-11-2007.
  39. Three Day Faculty Development Program on “8086/VHDL/8051 Design labs“, SJCE, Mysore, held during 10 -09-2004 to 12 -09-2004.

Industries Visited

  1. DMS Technology Pvt. Ltd., Mysore 
  2. Kaynes Technology India Pvt. Ltd., Mysore.
  3. AT&S, Nanjangud, Mysore.
  4. SIENNA ECAD Technologies Pvt. Ltd., Bangalore.
  5. Cyient DLM, Mysore.
  6. Skanray Technologies Pvt. Ltd., Mysore.
  7. Sree Jnanakshi Renewable Energy Pvt. Ltd., Mandya.
  8. ATOTECH India Pvt. Ltd, Bengaluru
  9. Nueline Technologies, Bengaluru
  10. Alpha Imager, Bengaluru

Trainer/ Resource Person

  1. Trainer for PCB Manufacturing Engineer course Approved by ESSCI in collaboration with AT & S .
  2. Trainer for PCB Design Engineer course approved by ESSCI and in collaboration with Sienna Ecad.
  3. Five days online workshop on Basics of Python organized by dept of ECE VVIET in association with IEEE. 
  4. The online National Level Faculty Development Program on “Introduction to PCB Manufacturing Process and Technologies” organized by ECE Dept. VVIET in association with Sienna Ecad Technologies, Bangalore and ESSCI, New Delhi, on 30th June 2020.  
  5. One day workshop on Signal and Image Processing using Python for second year students.
  6. Five Days FDP on “PCB Design and Manufacturing Process” for faculties of ECE Department, VVIET, Mysore.
  7. Trainer for six months course on PCB Design approved by ESSCI for 13 students in 2019-2020.
  8. Trainer for Four weeks skill development training on “PCB Design and Manufacturing Process” for 57 students in 2018-19.